Canon imagePRESS C1 Service Manual - page 1226
Chapter 17
17-1
17.1 Outline
17.1.1 Types of System Software
0013-8721
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
T-17-1
* 100V machines only
Types of System Software
System Software
Name
Description
Main Controller
SYSTEM
1 for inside Japan and 1 for outside Japan
Main controller also controls the G3FAX board (1line).
Language Module
LANGUAGE
This is the message data displayed in the local UI. This module needs to be installed for each language.
Installed languages can be changed from 'User Mode > Common Settings > Language Switch'. The
version of the module must be consistent with that of the system.
Remote UI Contents
RUI
This is the Remote UI contents accessed from Web browser for the operation of the main body.
Installed languages can be selected from the top page of the Remote UI.
Boot Program
BOOT
Boot system software is common in all the models.
This software can be upgraded by ROM-DIMM replacement.
MEAP Library
MEAPCONT
MEAPCONT is the standard library to use MEAP.
Voice Dictionary
TTS
This is the voice dictionary data used in the environment where the voice guidance board is mounted.
This dictionary is used when adding the Voice Guidance Kit (optional).
WEB Browser
BROWSER
BROWSER is the data used for WEB browser display which is the optional function. This is used
when adding the WEB Browser Expansion Kit (optional).
DC Controller
DCON
Downloading of DCON is performed by way of the main controller assembly. As the BootROM is
installed separately, it can be re-tried even in the case of failure in downloading of DC controller PCB.
Reader Controller
RCON
Downloading of RCON is performed by way of the main controller assembly. As the BootROM is
installed separately, it can be re-tried in the case of failure in downloading of reader controller PCB.
(Downloading of Rcon is not available unless the DC controller is started properly.)
Time Stamp Module *
TSTMP
This is the module used for the function to send PDF with electronic signature.
This function is used when adding the Time-Stamp PDF Expansion Kit (optional*).
Media Brand Information File
MEDIA
This is the file that includes the media brand information selected as the media type. Upgrading of this
file enables the addition of the available media brands.
Simple NAVI
HELP
This is the data to display Simple Navi (operation supporting function).
WebDAV Contents
WebDAV
This is the module used for the function to send input image to the WebDAV server on internet/intranet
using WebDAV protocol.
Multi-port FAX* *
G3FAX
This is the control software used for the multi-port FAX board. This software can be upgraded by
ROM-DIMM replacement, and is used when adding the multi-port FAX board/Y1 (optional*).
OCR Dictionary
SDICT
This is the dictionary used for conversion of the image data read from the reader assembly to character
codes (OCR processing).
This is used when adding the Searchable PDF Kit (optional).
Encryption Communication Key,
Certificate/CA Certificate
KEY
This function is used for SSL/e-RDS communication.
KEY means the key and the certificate used for encrypted communication on the network.
ADF Controller
CPU
This is used when adding the DADF-R1 (optional).
Special service tool (Downloader PCB: FY9-2034) is required.
Finisher Controller
FIN_CON
This is used when adding the Finisher-AA1, Saddle Finisher-AA2 (optional).
Special service tool (Downloader PCB: FY9-2034) is required.