Canon imagePRESS C1 Service Manual - page 125
Chapter 2
2-31
F-2-34
2.2.4 Locking the Primary Transfer Roller In Place
0012-6285
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door[1]
F-2-35
2) Lift the pressure lever for the primary transfer roller [1] in the direction of
the arrow, and lock the roller in place; thereafter fit the pressure lever for
the primary transfer roller [1] in place with the screw [2].
F-2-36
3) Close the front door.
2.2.5 Decurler points to Note About Installation
0014-2687
imagePRESS C1 P / imagePRESS C1+ (Printer)
2.2.6 Mounting the Decurler
0012-7424
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Attach the buffer mounting plate (front) [1].
- 3 screws (binding; M4X8) [2]
2) Attach the buffer mounting plate (rear) [3].
- 2 screws (binding; M4X8) [4]
F-2-37
3) Fit the 4 shafts [1] of the decurler to the 4 hooks [2]at the left side of the
main machine to mount the decurler [3].
When moving the machine, the scanning system fixing screws should be
stored away because the scanning system location needs to be fitted in place.
[1]
[1]
Before mounting the decurler, mount the reader and the printer cover.
[1]
[2]
[3]
[4]
[1]
[2]