Canon imagePRESS C1 Service Manual - page 324
Manual is about: imagePRESS C1 Series
of
1265
Chapter 5
5-45
F-5-225
19) Detach the reader left cover [1].
- 4 screws [2]
F-5-226
20) Remove the I/F board shielding plate [1].
- 8 screws [2]
- 2 screws [3]
F-5-227
21) Remove the 4 screws [1] and tilt the connector mount [2] forward.
F-5-228
22) Remove the cable [3] from the 2 wire saddles [1] and then remove the
reuse band [3].
23) Disconnect the connector [4] and then remove the cable [6] from the
edge saddle [5].
F-5-229
24) Remove the DF right hinge mount [1].
- 7 screws [2]
F-5-230
25) Detach the small cover (right rear).
- 1 screw [2]
[2]
[1]
[1]
[2]
[2]
[2]
[3]
[2]
[1]
[2]
[1]
[1]
[1]
[2]
[3]
[5]
[6]
[4]
[1]
[2]
[2]
[2]