Canon imagePRESS C1 Service Manual - page 633
Chapter 10
10-31
3) Remove one grounding terminal screw [1] and one reuse band [2].
4) Remove the harness [4] from one wire clip [3], and remove one connector
[5].
F-10-125
5) Remove the sheet metal [1].
- 5 screws [2]
When removing the sheet metal [1], the primary suction fan air filter may
come down. The air filter convex area is turned up, so be careful at installa-
tion.
F-10-126
6) Remove the HV5 PCB [1].
- 3 connectors [2]
- 1 screw [3]
- 4 PCB supports [4]
F-10-127
10.5.13 HV8 PCB
10.5.13.1 Preparation for Removing the HV8 PCB
0013-9359
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front cover. (page 10-11)Reference [Front Cover Opening]
2) Pull out the fixing feeder unit forward.
10.5.13.2 Removing the HV8 PCB
0013-9362
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Move the registration guide unit [1].
- 4 screws [2]
F-10-128
2) Remove the harness from the guide [A], remove the HV PCB mount [1].
- 3 connectors [2]
- 3 screws [3]
F-10-129
3) Remove the HV8 PCB [1].
- 2 connectors [2]
- 3 screws [3]
F-10-130
10.5.14 Fixing Driver PCB
10.5.14.1 Preparation for Removing the Fixing Driver
PCB
0013-9399
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front cover. (page 10-11)Reference [Front Cover Opening]
2) Pull out the fixing feeder unit.
10.5.14.2 Removing the Fixing Driver PCB
0013-9400
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the external delivery assembly cover [1].
[1]
[2]
[3]
[4]
[5]
[1]
[2]
[2]
[2]
[2]
[1]
[2]
[2]
[3]
[4]
[4]
[4]
[2]
[2]
[1]
[2]
[3]
[3]
[3]
[4]
[1]
[4]
[2]
[3]
[3]
[1]