Canon imagePRESS C1 Service Manual - page 154
Chapter 2
2-60
F-2-189
27) Attach the lock hinge cover L [1].
- 2 bosses [2]
- 1 screw (TP; M3X8) [3]
F-2-190
28) Tilt the control panel [1] in the direction of the arrow.
F-2-191
29) Fit the hinge slide cover [1] in the direction of the arrow.
F-2-192
30) Fix the hinge slide cover.
- 2 screws (TP; M3X8) [1]
- 2 cover rubber pieces (Small) [2]
F-2-193
2.2.19 Setting of Environmental Switch
0013-9816
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Check that the Environmental switch [1] is ON.
F-2-194
2.2.20 Turning the Main Power ON
0015-8524
imagePRESS C1 P / imagePRESS C1
1) Connect the power cable with the inlet on the main body.
MEMO:
The lock hinge cover is easily attached if placing the arm unit [1] at the right
angle to the control panel [2].
[1]
[2]
[1]
[2]
[2]
[3]
[1]
[2]
[3]
[1]
Before turning the main power on, be sure to remove the packing materials.
[1]
[1]
[1]
[2]
ON
ON
[1]