Canon imagePRESS C1 Service Manual - page 883
Chapter 15
15-20
T-15-3
In case of XX=[01-13,FF]
T-15-4
XX
YY
Description
Measures
00
01
If cannot recognize HDD
If cannot find the start partition
(BOOTDEV) at start-up
1. Turn OFF the power and check the connection of HDD cable. After that, turn ON the power.
2. When turning ON the power, put an ear onto HDD or touch HDD to check whether the inner disk is rotating or
not.
3. Replace HDD (after replacement, system needs to be reinstalled).
4. Replace the main controller PCB (MAIN-M)
02
If the system for main CPU
does not exist
1. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
2. Replace HDD (after replacement, system needs to be reinstalled).
03
If the operation is interrupted
when writing into BootDevice
Measures differ depending on an error display.
1. After turning OFF the power, turn ON the power while pressing 1 and 9 keys.
This operation starts the repair processing of writing interrupted sector automatically (at this time, screen display
will be solid black). During the repair processing of writing interrupted sector, progress status is displayed on a
screen and it will be completed when the screen display will be blanc. After the completion, turn OFF/ON the
power.
2. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
3. Replace HDD (after replacement, system needs to be reinstalled).
1. Specify CHK-TYPE=0 and execute HD-CHECK. After completion, turn OFF/ON the power.
2. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
3. Replace HDD (after replacement, system needs to be reinstalled).
06
If system for sub-CPU does not
exist
1. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
2. Replace HDD (after replacement, system needs to be reinstalled).
07
If ICC profile (color resource
file) does not exist
1. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
2. Replace HDD (after replacement, system needs to be reinstalled).
12
If the files on HDD to be
reviewed by WEB browser are
broken or deleted
1. Reinstall WEB browser contents.
2. Replace HDD (after replacement, system needs to be reinstalled).
13
Patch data for main scanning
shading does not exist
1. Reinstall the patch data for main scanning shading via SST.
2. Replace HDD (after replacement, system needs to be reinstalled).
14
If cannot recognize HDD
If cannot find the start partition
(BOOTDEV) at start-up
1. Turn OFF the power and check the connection of HDD cable. After that, turn ON the power.
2. When turning ON the power, put an ear onto HDD or touch HDD to check whether the inner disk is rotating or
not.
3. Replace HDD (after replacement, system needs to be reinstalled).
4. Replace the main controller PCB (MAIN-M)
XX
YY
XX
CHK-
TYPE
Corresponding
partition
Description
Occurrence at start-up
At normal operation
3
5
00,01,02,0
4
11,21
13,25
10,12,14,22,23,24
Measures
Measures
1
1
FSTDEV
Compressed image data (BOX etc.)
*1 *5
*9 *10 *11 *12
2
IMG_MNG
Document management table, profile
3
FSTCDEV
Job archiving (chasing)
4
THUMDEV
Thumbnail
5
2
APL_GEN
Universal data
6
TMP_GEN
Universal data (temporary files)
7
TMP_FAX
Not used
8
TMP_PSS
For PDL spooling (temporary files)
9
3
PDLDEV
PDL related files (front, registration form, color
correction information file for PDL function)
10
4
BOOTDEV
Firmware (System/MEAP/key/license/PDF
dictionary/RUI contents/voice dictionary)
*3 *8
11
5
APL_MEAP
MEAP application *1 *5
12
6
APL_SEND
Address book, filter *2 *5
13
7
APL_KEEP
MEAP save data *3 *8
14
8
APL_LOG
System logs *1 *5
FF
0
can not be
specified
HDD full failure sector check and recovery
*4 *7