Canon imagePRESS C1 Service Manual - page 593
Chapter 9
9-56
F-9-159
9.7.24 Fixing Locking Heater
9.7.24.1 Preparation for Removing the External Heater
0014-0219
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
9.7.24.2 Removing the External Heater
0014-0220
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the fixing upper cover [1].
- 2 stepped screws [2]
- 1 screw [3]
F-9-160
2) Remove the harness guide [1].
- 2 screws [2]
F-9-161
3) Pull out the external pressure roller assembly [1] in the direction of the ar-
row.
- 2 screws [2]
F-9-162
Points to Note When Removing/Mounting the External Heater
In the case of removing/mounting the external heater, take care not to scratch
the surface of the roller as indicated in the figure below.
F-9-163
4) Remove the external heat roller unit [1].
- 1 screw [2]
- 2 springs [3]
F-9-164
5) Pull out the external heater [1] in the direction of the arrow.
F-9-165
[1]
[1]
[2]
[3]
[2]
[1]
[1]
[2]
[2]
[2]
[1]
[3]
[3]
[1]