Canon imagePRESS C1 Service Manual - page 892
Chapter 15
15-29
15.5 Alarm Codes
15.5.1 Alarm Code
0014-0594
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
T-15-12
0093
User cover open
PI3,PI6
When opening of a cover (front or rear) is detected while the machine is in operation.
0094
Initial stationary
PI4,PI12,PI13,S
1,S2,S3,S4,S5,S
9
When a sensor in the delivery path detects a document when the operation is started.
0095
Cycle NG
S6
When a pickup signal is received for a specified period of time (2 sec) in the no document detection state.
0096
Remaining document
S1
When the reverse sensor detects a document while the belt motor is driven by a specified amount before
a left pickup job is started.
0097
Manual feed document
stationary
S1,S9
When the reverse sensor detects a document while the mulfifeed registration roller sensor is detecting it
during the multifeed pickup operation.
0098
Power down
-
When supply voltage from the main unit is lowered while the machine is in operation.
Block Code
Detailed Code
01 main body (general)
0000
Indicates the presence of 11 pixel or larger dust (Red)
0001
Indicates the presence of 11 pixel or larger dust (Green)
0002
Indicates the presence of 11 pixel or larger dust (Blue)
02 scanning system
0000
Indicates the presence of dust on all the lines of sub scanner (at the end of job)
0001
Indicates the presence of dust on all the lines of sub scanner (at the beginning of job)
04 pickup / feeding system
0000
Indicates that the fan lock signal does not change to LOW even 2 sec after fan starts driving
0008
Indicates the accessory deck lifter error
0011
Indicates the cassette 1 retry pickup error
0012
Indicates the cassette 2 retry pickup error
0013
Indicates the cassette 3 retry pickup error
0014
Indicates the cassette 4 retry pickup error
0017
Indicates the MPtray retry pickup error
0018
Indicates the otion deck retry pickup error
0031
Indicates the cassette 1 lifter motor overcurrent
0032
Indicates the cassette 2 lifter motor overcurrent
0033
Indicates the cassette 3 lifter motor overcurrent
0034
Indicates the cassette 4 lifter motor overcurrent
06 fixing system
0002
Indicates that the fixing upper roller life is over
0003
Indicates the no fixing web
10 Developing System, Copier 0001
Toner low (Bk)(This alarm code issued by RDS.)
0002
Toner low (C)(This alarm code issued by RDS.)
0003
Toner low (M)(This alarm code issued by RDS.)
0004
Toner low (Y)(This alarm code issued by RDS.)
0005 *
Toner low (L)(This alarm code issued by RDS.)
11 waste toner collecting system 0001
Indicates that the waste toner is full
33 fan
0014
Indicates the feeding fan 1 alarm
0015
Indicates the feeding fan 2 alarm
61 finisher
0001
Indicates the absence of staple
62 saddle stitcher
0001
Indicates the absence of stitch
65 puncher
0001
Indicates that the punch chips are full
72 Surf
0001
Indicates the faulty access to the register
0002
Indicates the faulty data transmission to the memory (includes timeout)
0003
Indicates the rendering error (ECI module)
0004
Indicates the rendering error (EM module)
0005
Indicates the rendering error (IE module)
0006
Indicates the rendering error (IDM module)
0007
Indicates the rendering error (LAM module)
0008
Indicates the rendering error (MI module)
0009
Indicates the rendering error (PCM module)
0010
Indicates the rendering error (PGM module)
0011
Indicates the rendering error (VII module)
0012
Indicates the rendering error (VOI module)
0014
Indicates the rendering error (rendering timeout)
0015
Indicates the rendering error (MRA module)
0016
Indicates the rendering error (POC module)
Code
Type of Jam
Sensor No.
Details