Canon imagePRESS C1 Service Manual - page 659
Chapter 11
11-14
11.1.9 MEAP Specifications
0018-6619
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
What is MEAP Specifications (MEAP Spec Version)?
MEAP Specifications is one of the information required to judge whether MEAP applications can be operated or not. With MEAP Specifications, you can prevent
an application that uses a specific function of device from being installed onto the device that does not have the function.
About Name
MEAP Specification is shown as 'MEAP Specifications' in the screen to check the version on the side of device that supports MEAP (counter confirmation button)
and MEAP platform (SMS). On the other hand, in the manifest file of MEAP application, it is shown as 'MeapSpecVersion' (described in the same way in the SDK
document)
(Note) 'MEAP Specifications' hereafter in this document.
Mechanism
MEAP platform judges whether MEAP applications can be operated on it using on the 2 information below:
- Device Specification ID
- MEAP Specifications
Device Specification ID shows information such as the original functions of MFP (including print, scan, and copy), and one that differs by model such as maximum
copy number, thus each model has a different ID. (It is easy to determine the IDs for this reason.) MEAP application declares 1 or more Device Specification ID
required for its execution. Declaration of multiple Device Specification IDs means that the application is operable in all the models declared. Upon installation of
MEAP application in (using) SMS or MEAP Enterprise Service Manager, matching of Device Specification ID is executed on the side of MEAP platform machine.
The machine which doesn't support the ID declared by the application rejects installation of such an application.
Meanwhile, MEAP Specifications shows other information than defined by Device Specification ID above, including network and security. Thus each model does
not always have the same version.
MEAP application declares 1 or more MEAP Specifications required for its execution. Declaration of multiple Device Specification IDs means that the application
is operable in all the environments declared. Upon installation of MEAP application in SMS or MEAP Enterprise Service Manager, matching of MEAP Specifica-
tions is executed on the side of MEAP platform machine. The machine which doesn't support the version declared by the application rejects installation of such an
application.
MEAP Spec Version for each model
T-11-14
Product Name
USA EUR OCE SPL KOR CCNT
W
Initial MEAPSpecVer
MEAPSpecVer after Firmware
Upgrade
iR 6020
Y
Y
Y
Y
-
1
1. 2 (System v54.xx later)
iR 5020
Y
Y
Y
Y
-
iR 3320
Y
Y
Y
Y
-
1
1. 2 (System v33.xx later)
iR 2220
Y
Y
Y
Y
-
iR C3220
Y
Y
Y
Y
-
1, 2, 3
iR C2620
Y
Y
Y
Y
-
iR 2870
Y
Y
Y
Y
Y
5
5, 6, 7 (System v30.xx later)
iR 4570
Y
Y
Y
Y
Y
iR 2270
Y
Y
Y
Y
-
iR 3570
Y
Y
Y
Y
Y
iR85+
Y
Y
-
-
-
5
5, 6, 7 (System v10.xx later)
iR 8070
Y
Y
Y
-
-
5, 6, 7, 17(System v15.XX later)
iR 105+
Y
Y
Y
Y
Y
iR 9070
Y
Y
Y
Y
-