Canon imagePRESS C1 Service Manual - page 299
Manual is about: imagePRESS C1 Series
of
1265
Chapter 5
5-20
F-5-59
7) Remove the magnet support plate [1].
- 2 screws [2]
F-5-60
8) Detach the reader right upper cover [1].
- 2 cover rubbers [2]
- 2 screws [3]
F-5-61
9) Detach the reader right cover [1].
- 3 cover rubbers [2]
- 3 screws [3]
F-5-62
10) Detach the CCD unit cover [1].
- 9 screws [2] (3 on the right side of the reader unit)
F-5-63
F-5-64
Points to Note When Attaching the CCD Unit Cover
When attaching the CCD unit cover, be sure to hook the 2 claws [1] on the 2
slots and then fix it by screw.
F-5-65
11) Disconnect the connector [1], and then remove the cable [2] from the
edge saddle [3].
12) Remove the reused band [4] and then remove the cable [5] from the cable
[2]
[3]
[1]
[2]
[1]
[1]
[2]
[3]
[2]
[3]
[1]
[2]
[2]
[2]
[3]
[3]
[3]
[1]
[2]
[2]
[2]
[2]
[2]
[1]