Canon imagePRESS C1 Service Manual - page 307
Chapter 5
5-28
F-5-112
6) Remove the interface PCB [1].
- 7 screws [2]
- 2 screws [3]
F-5-113
5.4.7 Inverter PCB
5.4.7.1 Preparation for Removing the Inverter PCB
(imagePRESS C1 Series/imagePRESS C7000 Series)
0013-9954
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Remove the copyboard glass. (page 5-16)Reference [Removing the
Copyboard Glass]
5.4.7.2 Removing the Inverter PCB (imagePRESS C1
Series)
0013-9955
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Detach the reader right upper cover [1].
- 2 cover rubbers [2]
- 2 screws [3]
F-5-114
2) Detach the reader right cover [1].
- 3 cover rubbers [2]
- 3 screws [3]
F-5-115
3) Remove the CCD unit cover [1].
- 9 screws [2] (3 on the right side of the reader assembly)
F-5-116
F-5-117
Points to Note When Attaching the CCD Unit Cover
When attaching the CCD unit cover, be sure to hook the 2 claws [1] on the 2
slots [2] and then fix it by screw.
F-5-118
4) Remove the inverter PCB [1].
- 1 flat cable [2]
- 1 connector [3]
[1]
[1]
[2]
[2]
[1]
[3]
[2]
[1]
[2]
[3]
[2]
[3]
[1]
[2]
[2]
[2]
[3]
[3]
[3]
[1]
[2]
[2]
[2]
[2]
[2]
[1]