Canon imagePRESS C1 Service Manual - page 175
Chapter 2
2-81
F-2-286
3) Attach the bush [3] to the reader fixing plate (right front) [1] and the read-
er fixing plate (right rear) [2].
F-2-287
4) Attach the reader fixing plate (right front) [1].
- 2 screws (TP; M4X6) [2]
F-2-288
5) Attach the reader fixing plate (right rear) [1].
- 2 screws (TP; M4X6) [2]
F-2-289
6) Attach the reader front cover [1].
- 2 magnet catches [2]
- 2 flat-head screws [3]
F-2-290
7) Place the reader unit [1] on the host machine.
F-2-291
8) Match the screw hole [1] of the reader unit and the screw hole [2] of the
reader fixing plate.
F-2-292
9) Fit the bush [3] to the reader fixing plate (front left [1] removed and rear
left[2]) which were remove in the step 2).
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[2]
[1]
[2]
In the case of maunting the readr[1], make sure that the left cover(of the
main machine)matches to the left reader.
[2]
[3]
[2]
[3]
[1]
[1]
[2]
[1]
[1]
[2]