Canon imagePRESS C1 Service Manual - page 124
Chapter 2
2-30
F-2-28
13) Remove the 4 shipping tags [1] from the lower rear right cover.
14) Open the upper right cover [2] and the lower right cover [3].
F-2-29
15) Remove the 4 release spacers [1] from the each pickup unit.
F-2-30
16) Close the upper right cover and the lower right cover.
17) Remove the lower rear right cover [1].
- 2 screws [2]
F-2-31
18) Fit the 2 grips [1] removed in step 10) into the compartment [2].
F-2-32
19) Attach the lower rear right cover.
20) Attach the 2 grip face covers (B) [1] to the openings into which the grips
have been put away.
F-2-33
2.2.3 Mounting Scanning System
0012-6269
imagePRESS C1 / imagePRESS C1+
1) Remove 3 scanning system fixing screws [1].
When removing the spacer, be sure to push the lever [2] in the direction of
[A] and then detach it in the direction of [B] to avoid damage to the pickup
assembly.
[1]
[1]
[2]
[3]
[1]
[2]
[A]
[B]
[1]
[2]
[2]
[1]
[1]