Canon imagePRESS C1 Service Manual - page 1048
Chapter 16
16-151
MTR
Specify a motor to be checked.
(Range: 1 to 55)
Operation method
1) Select this item.
2) Enter the code of a motor using numeric keys.
1. M1: Polygon motor
2. M2: Drum / ITB motor
3. M3: Developing motor
4. M4: Rotation developer drive motor
5. M5: Multi pre-registration drive motor
6. M6: Registration drive motor
7. M7: External delivery motor
8. M8: Reverse motor for double sided copy
9. M9: Left motor for double sided copy
10. M11: Right motor for double sided copy
11. M12: Vertical path 1 motor
12. M13: Vertical path 2 motor
13. M14: Vertical path 3 & 4 motor
14. M15: Cassette 1 & 2 pickup motor
15. M16: Pickup 3 & 4 motor
16. M17: Secondary transfer roller detachment/attachment motor
17. M18: ITB cleaning brush roller detachment/attachment motor
18. M19: Primary wire cleaning motor
19. M20: Drum/post cleaning motor
20. M21: Horizontal registration motor
21. M22: Cassette 1 lifter motor
22. M23: Cassette 2 lifter motor
23. M24: Cassette 3 lifter motor
24. M25: Cassette 4 lifter motor
25. M26: ITB cleaning brush roller drive motor
26. M27: Cartridge motor Y
27. M28: Cartridge motor M
28. M29: Cartridge motor C
29. M30: Cartridge motor K
30. M31: Cartridge motor LM
31. M32: Cartridge motor LC
32. M33: Cleaning web detachment/attachment motor
33. M34: Fixing belt detachment/attachment motor
34. M35: Fixing belt displacement control motor
35. M36: Fixing belt drive motor (detachment)
36. M37: Secondary transfer roller drive motor
37. M38: Fixing motor
38. M39: Hopper motor Y
39. M40: Hopper motor M
40. M41: Hopper motor C
41. M42: Hopper motor K
42. M43: Hopper motor LM
43. M44: Hopper motor LC
44. M45: External heating detachment/attachment motor
45. M46: Feeding motor
46. M48: Decurler feeding 1 motor
47. M49: Decurler feeding 2 motor
48. M50: Decurler input volume adjustment 1 motor
49. M51: Decurler input volume adjustment 2 motor
3) Press the OK key.
4) Press MTR-ON and check the operation.
1
MTR-ON
Start the motor operation.
Operation method
1) Select this item and press the OK key.
ON for 5 seconds --> End
1
SL
Specify a solenoid to be checked.
(Range: 1 to 15)
Operation method
1) Select this item.
2) Enter the code of a solenoid using numeric keys.
1. SL1: Multi lifting plate SL
2. SL2: Reverse roller gap SL
3. SL3: Delivery flapper SL
4. SL4: Cassette 1 pickup SL
5. SL5: Cassette 2 pickup SL
6. SL6: Cassette 3 pickup SL
7. SL7: Cassette 4 pickup SL
8. SL8: Patch detection shutter SL
9. SL9: Optical ATR shutter SL
10. SL10: Color sensor SL
11. SL11: Web SL
3) Press the OK key.
4) Press SL-ON and check the operation.
1
SL-ON
Start the solenoid operation.
Operation method
1) Select this item and press the OK key. ON/OFF operation is repeated in the following pattern.
ON for 0.5 seconds --> OFF for 5 seconds --> ON for 0.5 seconds --> OFF for 5 seconds --> OFF
1
COPIER > FUNCTION > PART-CHK
Subheading Contents
Level