Canon imagePRESS C1 Service Manual - page 612
Manual is about: imagePRESS C1 Series
of
1265
Chapter 10
10-10
10.4.4.2 SNMP setup
0014-1319
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
When the machine is used as a Windows printer, enabling 'Use SNMP' causes the operating system to collect machine status information at specific intervals, pre-
venting the machine from starting a sleep state.
To avoid the situation, disable the setting (Windows' printer properties).
-Disabling 'Use SNMP'
1) Select 'Configure Port' on the Ports screen (printer properties).
F-10-5
2) Remove the check mark from 'SNMP Status Enabled'.