Canon imagePRESS C1 Service Manual - page 1012
Chapter 16
16-115
16.4.2 FEEDER
16.4.2.1 FEEDER List
0011-9642
imagePRESS C1 / imagePRESS C1+
T-16-119
CS1OFHIY
Adjust the main unit offset of the HT ideal brightness value Y for Color Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFDMK
Adjust the main unit offset of the solid actual measurement brightness value K for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFDMC
Adjust the main unit offset of the solid actual measurement brightness value C for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFDIK
Adjust the main unit offset of the solid ideal brightness value K for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFDIC
Adjust the main unit offset of the solid ideal brightness value C for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFHMK
Adjust the main unit offset of the HT actual measurement brightness value K for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFHMC
Adjust the main unit offset of the HT actual measurement brightness value C for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFHIK
Adjust the main unit offset of the HT ideal brightness value K for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFHIC
Adjust the main unit offset of the HT ideal brightness value C for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFWMK
Adjust the main unit offset of the solid white actual measurement brightness value K for Color
Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFWMC
Adjust the main unit offset of the solid white actual measurement brightness value C for Color
Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFWIK
Adjust the main unit offset of the solid white ideal brightness value K for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFWIC
Adjust the main unit offset of the solid white ideal brightness value C for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS1OFWMM
Adjust the main unit offset of the solid white actual measurement brightness value M for Color
Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS1OFWIY
Adjust the main unit offset of the solid white ideal brightness value Y for Color Sensor
1
Setting range: 0 to 1023
Standard value: 0
FEEDER>ADJSUT
Subheading Contents
Level
DOCST
Adjust the position of the lead edge of a document image.
Adjustment method
When you increase the setting value, the lead edge timing becomes slow.
1
Adjustment range
-7 to +7 (Unit: 0.5mm)
COPIER > ADJUST > P-PASCAL
Subheading Contents
Level