Canon imagePRESS C1 Service Manual - page 1143
Chapter 16
16-246
ST-EXPDF
Display the installation status of the PDF expansion kit (encryption PDF + searchable PDF) in
transfer invalidation.
2
Setting range
0: Do not provide the PDF expansion kit. (not installed)
1: Provide the PDF expansion kit. (installed)
Standard value
0
- This mode is available only when the SEND function is installed.
- Only available for JP.
TR-EXPDF
Obtain a transfer license key of the PDF expansion kit (encryption PDF + searchable PDF) in
transfer invalidation.
Obtain a transfer license key to use the PDF expansion kit (encryption PDF + searchable PDF) by
other MFP machine.
2
Standard value
Transfer license key: 24 digits
- This mode is available only when the SEND function is installed.
- Only available for JP.
ST-PDFDR
Display the installation status of the PDF direct in transfer invalidation.
2
Setting range
0: Do not provide the PDF direct. (not installed)
1: Provide the PDF direct. (installed)
Standard value
0
TR-PDFDR
Obtain a transfer license key of the PDF direct in transfer invalidation.
Obtain a transfer license key to use the PDF direct by other MFP machine.
2
Standard value
Transfer license key: 24 digits
ST-SCR
Display the installation status of the encryption secure printing in transfer invalidation.
2
Setting range
0: Do not provide the encryption secure printing. (not installed)
1: Provide the encryption secure printing. (installed)
Standard value
0
- This mode is available only when the 3DES+USH-H board is mounted.
TR-SCR
Obtain a transfer license key of the encryption secure printing in transfer invalidation.
Obtain a transfer license key to use the encryption secure printing by other MFP machine.
2
Standard value
Transfer license key: 24 digits
- This mode is available only when the 3DES+USH-H board is mounted.
ST-HDCLR
Display the installation status of the HDD encryption / complete removal function in transfer
invalidation.
2
Setting range
0: Do not provide the HDD encryption / complete removal function. (not installed)
1: Provide the HDD encryption / complete removal function. (installed)
Standard value
0
- This mode is available only when the 3DES+USH-H board is mounted.
COPIER>OPTION>LCNS-TR
Subheading Contents
Level