Canon imagePRESS C1 Service Manual - page 581
Chapter 9
9-44
9.7.6 External Heat Roller
9.7.6.1 Preparation for Removing the External Heat
Roller
0014-0221
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
3) Pull out the external heater. (page 9-56)Reference [Removing the Ex-
ternal Heater]
9.7.6.2 Removing the External Heat Roller
0014-0222
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the external heat roller [1].
- 2 C-rings [2]
- 2 washers [3]
- 2 external heat heat-insulating bushes [4]
- 2 bearings [5]
F-9-85
9.7.6.3 When Replacing the External Heat Roller
0014-0223
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
- Apply grease (Molykote HP-300; CK-8012) to the inner diameter area [1]
and the outer diameter area [2] of the bushings for about 20 mg, so that to
make white coating in assigned areas.
Purpose: to avoid abnormal sound
F-9-86
- Make sure to wipe off the excessive grease because the grease adheres to
the both edge [1] of the external heat roller when mounting the greased
bushes to the fixing roller.
F-9-87
9.7.7 Oil Applying Roller
9.7.7.1 Preparation for Removing the Oil Coating Roller
0014-0189
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
3) Remove the fixing belt unit. (page 9-38)Reference [Removing the Fix-
ing Belt Unit]
4) Remove the fixing belt. (page 9-42)Reference [Removing the Fixing
Belt]
9.7.7.2 Removing the Oil Coating Roller
0014-0190
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the oil coating roller [1].
- 1 screw [2]
- 1 inlet heater contact cover [3]
F-9-88
9.7.8 External Heat Cleaning Roller
9.7.8.1 Preparation for Removing the External Heat
Cleaning Roller
0014-0195
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
9.7.8.2 Removing the External Heat Cleaning Roller
0014-0196
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the fixing upper cover [1].
- 2 stepped screws [2]
- 1 screw [3]
[1]
[2]
[3]
[4]
[5]
[2]
[3]
[4]
[5]
[1]
[2]
[1]
[1]
[2]
[3]