Canon imagePRESS C1 Service Manual - page 731
Chapter 13
13-12
F-13-33
2) Check if the left/right margin of the image copied from the manual tray
are within the standards.
3) Tighten the screw.
13.6.3 Registering Paper Width Standard Value at Manual
Feeder Tray
0013-3424
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
Execute registering paper width standard value for each paper size (A4R/A4/
A6R).
1) Slide the manual feeder tray width guide [1] to fit for A4R.
F-13-34
2) Select the following service mode items:
- COPIER > FUNCTION > CST > MF-A4R
3) Press OK key.
4) Write down the standard value for A4R (that was indicated on the control
panel) on the service label.
5) Also, make the following selections to register the paper width standard
value for A4 and A6R:
- COPIER > FUNCTION > CST > MF-A4
- COPIER > FUNCTION > CST > MF-A6R
[1]
[2]
[1]