Canon imagePRESS C1 Service Manual - page 627
Chapter 10
10-25
F-10-92
10.5.6 DC Controller PCB
10.5.6.1 Preparation for Removing the DC Controller PCB
0013-9302
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the right rear upper cover. (page 10-12)Reference [Removing
the Right Rear Upper Cover]
2) Remove the rear upper cover. (page 10-14)Reference [Removing the
Rear Upper Cover]
10.5.6.2 Removing the DC Controller PCB
0013-9307
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the grounding plate [1].
- 3 screws [2]
F-10-93
2) Remove the connector [1].
- 4 clamps [2]
F-10-94
3) Remove the DC controller box cover [1].
- 10 screws [2]
F-10-95
4) Remove 16 clamps [1].
F-10-96
5) Remove 40 connectors.
F-10-97
6) Remove the main body rear exhaust fan duct [1].
- 1 connector [2]
- 1 screw [3]
F-10-98
7) Move the DC controller box [1] to the left and remove it.
- 6 screws [2]
[1]
[1]
[1]
[2]
[1]
[2]
[2]
[1]
[2]
[2]
[2]
[1]
[1]
[1]
[1]
[1]
[3]
[2]