Canon imagePRESS C1 Service Manual - page 273
Manual is about: imagePRESS C1 Series
of
1265
Chapter 4
4-25
F-4-38
4.7.2.3 Removing the Main Controller PCB (Main)
0020-5121
imagePRESS C1+ (Printer) / imagePRESS C1+
1) Remove the HDD unit [1] with support sheet metal.
- 2 connectors [2]
- 4 screws [3]
F-4-39
2) Remove the TFT converter PCB [1].
- 2 screws [2]
F-4-40
3) Remove the main controller PCB (sub R-A) [1], the main controller PCB
(PPF-A, DQE-A) [2], the relay PCB (GU-SHORT) [3], the main control-
ler PCB (sub S-B, sub ZJ-A) [4], the main controller PCB (sub LAN-
BAR-A) [5].
- 10 screws [6]
- 1 connector [7]
F-4-41
4) Remove each 1 memory PCB [1][2], the 1 BOOTROM PCB [3], the 1
SRAM PCB [4].
F-4-42
5) Remove the main controller PCB (main) [1].
- 8 screws [2]
[1]
[2]
[2]
[2]
[2]
[2]
[1]
[2]
[3]
[3]
[3]
[3]
[1]
[2]
[1]
[2]
[3]
[4]
[5]
[6]
[6]
[7]
[1]
[2]
[3]
[4]