Canon imagePRESS C1 Service Manual - page 665
Chapter 11
11-20
2) Make the following selections: [MEAP Settings] button > [Print System Information] button > [Yes] button.
F-11-24
3) Press [Done] button as many times as necessary until the Basic screen appears.
4) Turn off the MEAP device's main power; wait for 10 sec, and then turn the power back on.
11.1.13 Reference (Application System Information)
0018-6622
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
You can check all applications installed to the device at a glance with the MEAP application status information and, thus, it is important for you to provide it when
you are reporting a problem.
The following items of information will be indicated or printed for individual applications:
T-11-17
Application System Information
Application Name
It is the name (bundle-name) declared in a statement within the application program. It may not necessarily be identical to the name of the program.
Application ID/System Application Name
In the case of a system application, it will be the file name. If a general application, it is the application ID (application-ID) declared in a statement within the ap-
plication program. Within the device, the applications are set apart by means of their application IDs.
Application Version
It is the version of the application (bundle-version) declared in a statement within the application program.
Status
It indicates the status of the application in question; specifically,
Installed: the application has been installed.
Active: the application is being in use.
Resolved: the application is at rest.
Installed On
It indicates the date on which the application was installed.
Vendor
It is the name of the vendor that developed the application, and is the name (bundle-vendor) declared in a statement within the application program.
License Status
It indicates the status of the license; specifically,
None: no license is needed.
Not Installed: no license has been installed.
Installed: the appropriate license has been installed.
Invalid: the license has been invalidated.
Overlimt: the license has been used beyond its permitted limit.
License Expires After
It indicates the date after which the license expires. If the status of the license is 'none', this item will not be printed.
License Upper Limit
The previous version of printing function for MEAP application status information (system information) was depended on PDL. However, current version of function
is not dependent on PDL. So even device for which PDL is not available can print it. (Since iRC3220)
MEMO:
The system information shown on the screen and the system information printed in the MEAP device's user mode are exactly the same.
Application Name: C-Cabinet Gateway for MEAP
Application ID/System Application Name: 03a46668-63e4-4636-9cbb-492b6cef05d5
Application Version: 1.0.0
Status: Resolved
Installed on: Tue Oct 21 14:00:11 GMT+09:00 2003
Vendor : Canon Inc.
License Status : Installed
Maximum Memory Usage : 1024
Registered Service :