Canon imagePRESS C1 Service Manual - page 624
Chapter 10
10-22
F-10-71
12) Hold the hopper unit [1] as in the figure and remove it.
F-10-72
10.5.3 DC Power Supply Unit
10.5.3.1 Preparation for Removing the Power Supply
Assembly
0013-9320
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the rear upper cover. (page 10-14)Reference [Removing the
Rear Upper Cover]
2) Remove the rear lower cover. (page 10-14)Reference [Removing the
Rear Lower Cover]
10.5.3.2 Removing the Power Supply Assembly
0013-9321
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove eight clamps [1].
F-10-73
2) Remove 19 connectors.
F-10-74
3) Remove the DC Power supply assembly [1].
- 4 screws [2]
F-10-75
10.5.4 Sub DC Power Supply
10.5.4.1 Preparation for Removing the Sub DC Power
Supply
0013-9388
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the left lower cover. (page 10-12)Reference [Removing the
Left Lower Cover]
10.5.4.2 Removing the Sub DC Power Supply
0013-9389
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the Sub DC power supply [1].
- 4 connectors [2]
- 4 screws [3]
F-10-76
2) Remove the sub DC power supply fan [3] from the sub DC power supply
[1].
- 2 screws [2]
[1]
[1]
[1]
[1]
[1]
[2]
[2]
[2]
[1]
[2]
[2]
[1]
[3]
[3]