Canon imagePRESS C1 Service Manual - page 271
Chapter 4
4-23
4.7 Parts Replacement Procedure
4.7.1 Controller Box
4.7.1.1 Preparation for Removing the Controller Box
0013-9384
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the left rear upper cover.
2) Detach the rear upper cover.
4.7.1.2 Removing the Controller Box
0013-9387
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the grounding plate [1].
- 3 screws [2]
F-4-26
2) Disconnect the connector [1].
- 4 clamps [2]
F-4-27
3) Loosen the 10 screws [1] on the controller box cover, and then, remove
the 6 screws [2].
F-4-28
4) Slide the controller box cover [1] in the direction of [A], and then, open it
in the direction of [B] to detach.
F-4-29
5) Disconnect the 12 connectors [1].
- 1 edge saddle [2]
F-4-30
6) Remove the 1 clamp [1] and the 1 edge saddle [2].
F-4-31
7) Detach the main body rear exhaust fan duct [1].
- 1 connector [2]
- 1 screw [3]
F-4-32
8) Detach the controller box [1].
- 9 screws [2]
[1]
[2]
[1]
[2]
[1]
[1]
[1]
[2]
[A]
[B]
[1]
[1]
[1]
[1]
[1]
[1]
[1]
[1]
[2]
[1]
[1]
[1]
[2]
[1]
[3]
[2]