Canon imagePRESS C1 Service Manual - page 317
Chapter 5
5-38
F-5-176
5) Detach the reader rear cover [1].
- 1 connector [2]
- 5 screws [3]
F-5-177
6) Detach the reader upper rear cover [1].
- 1 screw [2]
- 1 emboss [3]
F-5-178
7) For the subsequent steps, see step 3, 4 in 'Removing the ADF Open/Close
Sensor' (in the case of imagePRESS C1 Series).
5.4.11 Scanner Home Position Sensor
5.4.11.1 Removing the Scanner Home Position Sensor
(imagePRESS C1 Series)
0014-2560
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Detach the reader rear cover [1].
- 1 connector [2]
- 5 screws [3]
F-5-179
2) Detach the reader rear upper cover [1].
- 1 screw [2]
- 1 embossed section [3]
F-5-180
3) Remove the reader I/F cable [2] from the 2 wire saddles [1].
F-5-181
4) Remove the I/F board shielding plate [1].
- 8 screws [2]
- 2 screws [3]
F-5-182
5) Dismount the DF mount reinforcement plate [1].
- 3 connectors [2]
[1]
[2]
[1]
[2]
[3]
[2]
[3]
[1]
[1]
[2]
[3]
[2]
[3]
[1]
[1]
[2]
[2]
[3]
[2]
[1]