Canon imagePRESS C1 Service Manual - page 1180
Chapter 16
16-283
4. ACC
T-16-208
5. INT-FACE
CST-U1/U2/U3/U4
Specify a name of the paper used for the paper size group.
When the following special size paper is specified for U1, U2, U3, and U4, the paper size of U1,
U2, U3, and U4 can be handled as special size paper.
2
Setting range: 24 to 40
24: FOOLSCAP (CST-U2: Default)
25: Australian FOOLSCAP
26: OFFICIO
27: Ecuador OFFICIO
28: Bolivia OFFICIO
29: Argentina LETTER (U4: Default)
30: Argentina LETTER-R
31: Government LETTER (U1: Default)
32: Government LETTER-R
34: Government LEGAL (U3: Default)
35: FOLIO
36: Argentina OFFICIO
37: Mexico OFFICIO
38: EXECTIVE
39: 16K
40: 8K
COPIER > OPTION > ACC
Subheading Contents
Level
COIN
Switch a coin vendor.
Set whether or not to enter an administrator's mode of a coin vendor.
1
Setting range
0: Coin vendor unavailable (Control card is available. No charging)
1: Coin vendor (with charging)
2: Distant-place counter (with charging)
Standard value: 0
DK-P
Set a paper size to be used for the paper deck (option).
1
Setting range: 0 to 2
0: A4, 1: B5, 2: LTR
Standard value: 0
CARD-SW
Switch the UI screen for a coin vendor.
Setting range
0: Coin
1: Card
2: Coin and card
Standard value: 0
1
CL-MGCNT
Setting of notification to the external charging control device when L color is printed
0: When clear color is printed, provide a notification to the external charging control device as
color printing.
1: When clear color is printed, provide a notification to the external charging control device as
clear color printing separately from a notification of color/B&W printing.
Setting range: 0 to 10
Factory setting value: 0
1
SC-TYPE
Switching-over of the type of the Self Copier type machine (coin vender-capable machine)
Available only when the Soft ID for the machine is set as a specific user. This service mode is
used to switch over the machine type to a specific user type machine or generic Self Copier type
machine. Generic Self Copier has more functions than the specific user type machine.
2
Setting range
0: Specific user type machine
1: Generic Self Copier type machine
Standard value: 0
CC-SPSW
Switch the I/F support level of the control card (CCIV/CCV).
2
Setting range
0: Do not support the card.
1: Support the card. (Prioritize the speed.)
2: Support the card. (Prioritize the upper limit number of copies.)
Standard value: 0
- When this mode is set to 1, the maintenance of engine performance is prioritized, and the
operation cannot be stopped accurately based on the upper limit number of copies.
- When this mode is set to 2, the operation can be stopped accurately based on the upper limit
number of copies, but engine performance may be decreased for a certain cassette.
COPIER > OPTION > CST
Subheading Contents
Level