Canon imagePRESS C1 Service Manual - page 634
Chapter 10
10-32
F-10-131
2) Open the internal delivery assembly cover [1].
F-10-132
3) Remove the fixing front cover [1].
- 3 screws [2]
F-10-133
4) Remove the fixing driver PCB [1].
- 13 connectors [2]
- 6 screws [3]
F-10-134
Disconnect the connector [2] of J3313 with the connector hook surely held.
10.5.15 Feeding Driver PCB
10.5.15.1 Preparation for Removing the Feeding Driver
PCB
0013-9403
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front cover. (page 10-11)Reference [Front Cover Opening]
2) Pull out the fixing feeder unit.
10.5.15.2 Removing the Feeding Driver PCB
0013-9404
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the lever [1].
- 1 screw [2]
F-10-135
2) Remove the feeding front cover [1].
- 2 screws [2]
F-10-136
Points to Note When Attaching the Feeding Front Cover
The feeding front cover has the button to open the lower cover of the fixing/
feed unit.
To prevent the bar at the end of the button from being broken, take care to
attach the feeding front cover so that the bar is in proper position.
3) Remove the feeding driver PCB [1].
- 14 connectors [2]
- 6 screws [3]
[1]
[1]
[2]
[1]
[2]
[2]
[3]
[3]
[3]
[3]
[3]
[2]
[2]
[2]
[1]
[2]
[3]
[1]
[2]
[1]
[2]