Canon imagePRESS C1 Service Manual - page 688
Chapter 11
11-43
9) Check to see that it is reflected in setting field, and turn off the main power, and then, turn on the main power.
F-11-64
1) Startup [SERVICE MODE] (After pressing [USER MODE] button of MEAP device, press [2] button and [8] button at the same time on control panel. Then by
pressing [USER MODE] button again, [SERVICE MODE] screen is displayed).
2) Startup level 2 of [SERVICE MODE] (After starting up [SERVICE MODE] in step 1, press [USER MODE] button again. Then, by pressing [2] button on control
panel, the screen is displayed.
3) Press [COPIER] button.
4) Press [Option] button.
5) Press [BODY] button.
6) Press
or
button.
7) Press [MEAP-SSL] button.
F-11-65
8) Press the port number to specify on the control panel (the numerical value input in the field is displayed), and press [OK] button.
F-11-66