Canon imagePRESS C1 Service Manual - page 149
Chapter 2
2-55
F-2-160
10) Turn the gear [1]in the direction of the arrow to take up the slack of the
web [2].
F-2-161
11) Mount the web unit.
12) Mount the fixing assembly cover with fitting the groove [1] of fixing as-
sembly cover and the protrusion [2] of the fixing assembly.
F-2-162
13) While pushing the cable guide [1] in the direction of the arrow, attach the
fixing assembly cover [2].
- 3 screws
F-2-163
F-2-164
14) Close the inside cover.
15) Close the reversing delivery cover.
16) Put back the fixing/feeding assembly.
17) Put back the fixing/feeding release lever.
18) Close the front door.
2.2.18 Fitting the Control Panel in Place
0012-7275
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the right reader cover [1].
- 3 screws [2]
F-2-165
2) Detach the upper right cover [1].
- 3 screws [2]
F-2-166
3) Run the control panel interface cable [2] through the control panel arm
unit [1], and fix it with the edge saddle [3].
[2]
[1]
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[2]
[1]
[2]