Canon imagePRESS C1 Service Manual - page 562
Chapter 9
9-25
F-9-25
[1] Cleaning web
[2] Web take-up roller
SL11: Web solenoid
Take-up amount of the web
Small size: A4/A4R/B5/B5R/A5R/LTR/LTRR
Large size: A3/B4/LGR/LGL
Error code:
E005 (Web wrapping error)
0001 In the case of detecting open circuit of the web solenoid
9.5.2 Control of the Fixing Cleaning Web Length Detection
0013-3411
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
The following is the method to detect cleaning web length and the content of control.
1) During the initial phase of use, the fixing web, which is wrapped around the web take-up roller, is wrapped by the web take-up roller as the copy/print are made.
2) When the fixing web found on the web feed roller decreases, the web length detecting arm 1 moves in the direction of the arrow, causing the web length detecting
arm 2 block the light path to the web level sensor (PS22). After this sensor detection, when the fixing web solenoid is ON for 4 times, warning message for fixing
web length is displayed on control panel.
State
The number of web SL ON
Remarks
During the warm-up
Once per 30 sec
Change of the number of ON according to the warm-up
time
During the jam recovery
10
In the case that the detection temperature of the fixing
main thermistor is 145 deg C or more
20
In the case that the detection temperature of the fixing
main thermistor is less than 145 deg C.
During the print Black and white mode/small size
1
1
Black and white mode/large size
1
2
Color mode/small size
1
1
Color mode/large size
1
2
FR
FR
ONT
REAR
[1]
[2]
SL11