Canon imagePRESS C1 Service Manual - page 126
Manual is about: imagePRESS C1 Series
of
1265
Chapter 2
2-32
F-2-38
4) Push the decurler [1] in the direction of the arrow until it stops.
F-2-39
5) Open the decurler front cover [1].
F-2-40
6) Remove the fixing tape [1].
F-2-41
7) Attach the decurler [1] in place.
- 2 screws (binding; M4X8) [2]
F-2-42
8) Close the decurler front cover.
9) Connect the 5 connectors [1] to the main machine.
MEMO:
When attaching the decurler, adhere the decurler to the the left side of the
host machine, and for approximate position, refer to rear cover corner [A],
and fit the corner decurler [B] upper approx. 7 mm, inside part approx. 7
mm.
[3]
[2]
[1]
[2]
[2]
[2]
[1]
[1]
[1]
[B]
[A]
7mm
7mm
[1]
[1]
[1]
[2]
[1]