Canon imagePRESS C1 Service Manual - page 1090
Chapter 16
16-193
CNCT-RLZ
Set whether or not to use the Connection Serialize Function.
2
Function: Switch the use of the Connection Serialize Function.
[Remarks]
- Connection Serialize Function
This function is provided to guarantee the job grouping function of imageWARE Output Manager
Select Edition V1.0. Since an iR-series MFP machine provides multiple connections, you can
make a setting to prohibit reception of multiple connections at a device so that the job grouping
function is guaranteed. In other words, when you make a setting to prohibit reception of multiple
connections at a device, the device does not receive job data from a connection until reception of
job data from another connection is completed. (--> This prevents jobs to queue in different
order.)
- "Connection" refers to the connection established among multiple hosts (PCs) via network.
- Job Grouping Function
This is one of the functions provided by imageWARE Output Manager Select Edition V1.0. This
prohibits job interruption from other PC by performing group job transmission (by sending
multiple jobs in one cession).
Setting range
0: OFF (Connection Serialize Function is OFF)
1: ON (Connection Serialize Function is ON)
Standard value
0
2C-CT-SW
Switch a setting for the color counter (only for the two-color mode).
Set whether to use full-color counter or mono-color counter for the two-color mode count-up.
2
Setting range
0: Perform count-up to mono-color counter.
1: Perform count-up to full-color counter.
Standard value
1
Remarks
2-Color Print: 1 color from R, G, B, C, M, Y + Bk
Mono-color: 1 color only
DOM-ADD
Switch a setting of domain complement for email transmission.
Set whether or not to complement the domain information (ex.: @canon.co.jp) specified in the
user mode.
By setting 'canon@co.jp' to the domain in the user mode and set 1 for this mode, the address is
complemented to 'xxx@canon.co.jp' when performing the email transmission by just entering
'xxx'.
2
Setting range
0: Do not complement the domain information for the destination address.
1: Complement the domain information for the destination address.
Standard value
0
N-MAILOF
Set whether or not to prohibit a new address for email.
Prohibit a new address for email. (Prohibit selection of a new address.)
2
Setting range
0: Do not prohibit a new address selection.
1: Prohibit a new address selection.
Standard value
1
N-FAXOF
Set whether or not to prohibit a new address for FAX.
Prohibit a new address for FAX. (Prohibit selection of a new address.)
2
Setting range
0: Do not prohibit a new address selection.
1: Prohibit a new address selection.
Standard value
1
COPIER>OPTION>USER
Subheading Contents
Level