Canon imagePRESS C1 Service Manual - page 1104
Chapter 16
16-207
CD-IDL-T
Adjust the time to execute idling at first power-on for the IDL-T color developer (YMC).
Set the time to execute idling at first power-on for the color developer (YMC), which is sometimes
executed by initial multiple rotations under high-humidity environment.
When you decrease the setting value, downtime of initial multiple rotations can be reduced, but
density change from the first power-on is somewhat worsened.
When you increase the setting value, density change from the first power-on is improved, but
downtime of initial multiple rotations increases.
1
Setting range
-3 to +6 (1 level: 5 second)
Standard value
0
The setting value becomes valid after the main power switch is turned OFF/ON.
CNTR-DSP
Select the screen display according to the external controller.
1
Setting range
0: Display the external controller icon in the control panel of the copier main unit. (setting when
the color image server is connected)
1: Do not display the control panel of the copier main unit. (setting when the external controller
with an control panel is connected)
Standard value
0
BASE-SW
Make a setting to switch the setting from the MEAP-full model to the Base model.
Make a setting to switch the device which operated as a full model back to the base model.
1
Use it when trouble attributable to MEAP application occurs. By setting to '0', the operation of
MEAP application can be controlled.
settings
0: off (base model); 1: on (full model) [Default]
MEMO:
The change only from '1' to '0' is possible.
SC-L-CNT
Use it to set the threshold for identifying large size paper for the scan counter.
1
Settings
0: Count the paper larger than B4 as large size. (A paper that is B4 or smaller is considered as
small size.) [Default]
1: Count the paper larger than LTR as large size. (A paper that is LTR or smaller is considered as
small size.)
The scan counter threshold at copy is determined as follow depending on the combination with
the setting value of B4-L-CNT (COPIER > OPTION > USER > B4-L-CNT):
Count the paper larger than B4 as large size. (A paper that is B4 or smaller is considered as small
size.)
Count the paper that is B4 or larger as large size. (A paper smaller than B4 is considered as small
size.)
Count the paper larger than LTR as large size. (A paper that is LTR or smaller is considered as
small size.)
REPORT-Z
Make a setting to switch the attribute flag attached when printing a report.
1
Setting range
0: For PDL character mode
1: For PDL photo mode
2: For SCAN character mode
3: For SCAN photo mode
Standard value
0
COPIER>OPTION>BODY
Subheading Contents
Level