Canon imagePRESS C1 Service Manual - page 296
Chapter 5
5-17
F-5-40
5.4.3.2 Scanner Parts Replacement Procedure
(imagePRESS C1 Series/imagePRESS C7000 Series)
0014-1999
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
Parts:
CCD unit / copyboard glass / scanning lamp / standard white plate / inverter
PCB
Procedure
Execute the following Service Modes:
1) COPIER > ADJUST > CCD > W-PLT-X
COPIER > ADJUST > CCD > W-PLT-Y
COPIER > ADJUST > CCD > W-PLT-Z
(Enter the white level data for the white plate)
5.4.4 Exposure Lamp
5.4.4.1 Preparation for Removing the Scanner Lamp
(imagePRESS C1 Series/imagePRESS C7000 Series)
0013-9945
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Removing the copyboard glass. (page 5-16)Reference [Removing the
Copyboard Glass]
5.4.4.2 Removing the Scanner Lamp (imagePRESS C1
Series)
0013-9946
imagePRESS C1 / Color Image Reader-H1
1) Open the toner replacement cover [1].
F-5-41
2) Detach the hopper upper cover [1] in the direction shown by the arrow.
- 2 screws [2]
- 2 claws [3]
F-5-42
3) Close the toner replacement cover.
4) Detach the reader front cover [1].
- 2 screws [2]
- 2 magnet catches [3]
F-5-43
5) Detach the reader rear cover [1].
- 1 connector [2]
- 5 screws [3]
F-5-44
6) Detach the reader rear upper cover [1].
- 1 screw [2]
- 1 embossed section [3]
[1]
[2]
[2]
[1]
[1]
[2]
[3]
[1]
[2]
[2]
[3]
[3]
[1]
[2]
[3]