Canon imagePRESS C1 Service Manual - page 310
Chapter 5
5-31
- 1 connector [3]
- 1 screw [4]
- 2 PCB supports [5]
F-5-131
5.4.8 CCD Unit
5.4.8.1 Preparation for Removing the CCD Unit
(imagePRESS C1 Series/imagePRESS C7000 Series)
0013-9941
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Remove the copyboard glass. (page 5-16)Reference [Removing the
Copyboard Glass]
5.4.8.2 Removing the CCD Unit (imagePRESS C1 Series)
0013-9942
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Detach the reader upper right cover[1].
- 2 cover rubbers [2]
- 2 screws [3]
F-5-132
2) Detach the reader right cover [1].
- 3 cover rubbers [2]
- 3 screws [3]
F-5-133
3) Detach the CCD unit cover [1].
- 9 screws [2] (3 screws at the right side of the reader)
F-5-134
F-5-135
Points to Note When Attaching the CCD Unit Cover
When attaching the CCD unit cover, be sure to hook the 2 claws [1] on the 2
slots [2] and then fix it with screws.
F-5-136
4) Slightly lift up the document size sensor unit [1].
- 3 screws [2]
F-5-137
5) Remove the document size sensor unit [1].
- 1 connector [2]
[4]
[3]
[5]
[1]
[2]
[1]
[2]
[3]
[2]
[3]
[1]
[2]
[2]
[2]
[3]
[3]
[3]
[1]
[2]
[2]
[2]
[2]
[2]
[1]
[2]
[1]