Canon imagePRESS C1 Service Manual - page 1118
Chapter 16
16-221
UI-EPRNT
Set whether or not to display the expansion printing screen in the control panel.
This mode is used to set whether or not to display the expansion printing screen (EFI print screen)
in the control panel.
This is a specification for a user who does not desire to display the screen in the control panel.
2
Setting range
0: Do not display the screen.
1: Display the screen.
Standard value
1
UI-WEB
Set whether or not to display the Web browser screen in the control panel.
This mode is used to set whether or not to display the Web browser screen in the control panel.
This is a specification for a user who does not desire to display the screen in the control panel.
2
Setting range
0: Do not display the screen.
1: Display the screen.
Standard value
1
PASCL-TY
Set the paper type used for the automatic gradation correction (PASCAL).
This mode is used when executing PASCAL for the paper which is not recommended for the
destination.
2
Setting range
1: CLC-SK 80g paper (Countries other than USA/EU. Mainly Japan)
2: Hammermill 105g paper (for USA)
3: Neusiedler 100g paper (for EU)
Do not change the setting in a normal condition.
CARD-RNG
Set the number of cards available.
Set the number of cards available when using a card reader.
2
Setting range
1 to 1000
Standard value
1000
[Reference]
In the current condition, the starting number of the card is specified by
COPIER>FUNCTION>INSTALL>CARD, and the fixed number of cards is specified starting
from that number. (ex. fixed at 1000 cards)
WUEN-LIV
Set the activation interval after a sleep notice was provided from network.
Set the interval from when sleep activation was performed to the copier main unit from network
without sending a job to when the machine enters the sleep mode next.
2
Setting range
10 to 600
Standard value
15
(Unit: second) *10 seconds to 10 minutes
COMP-PRT
When performing printing for "printing of a page number / printing of the number of copies /
printing of a date / bookbinding / printing of a tint block (hereinafter called 'combined printing')
with the copying number of 2 or more, printing is prioritized in memory allocation for image
processing for a certain memory model (option) or document size. This causes a lack of memory
for image processing of scanning, SEND transmission (excluding FAX), and PDL input
operation, and such operation cannot be performed until printing is completed.
This mode is used to perform equal memory allocation to all jobs so that operation such as
scanning, SEND transmission (excluding FAX), and PDL input can be performed before printing
is completed (so that such operation is performed little by little).
2
Setting range
0: Prioritize printing.
1: Perform equal memory allocation.
Standard value
0
COPIER>OPTION>BODY
Subheading Contents
Level