Canon imagePRESS C1 Service Manual - page 318
Chapter 5
5-39
F-5-183
6) Remove the sensor mount [1].
- 1 screw [2]
F-5-184
7) Remove the scanner home position sensor [1].
- 1 connector [2]
F-5-185
5.4.11.2 Removing the Scanner Home Position Sensor
(imagePRESS C7000 Series)
0016-9501
Color Image Reader-H1
1) In the case of the copyboard cover, detach the upper rear face plate 1 [1].
- 1 screw [2]
F-5-186
2) Detach the upper rear face cover 3 [1].
- 2 screws [1]
F-5-187
- 1 screw [1]
F-5-188
3) Detach the top rear cover [1] of the sub station and remove the filter [2].
- 6 screws [3]
F-5-189
4) Detach the connector base [1].
- 2 screws [2]
[1]
[2]
[2]
[2]
[1]
[1]
[2]
[1]
[2]
When tightening the 2 screws at the top surface, be sure to tighten them
while pressing the upper rear cover in the direction of the arrow.
[1]
[1]
[3]
[1]
[3]
[3]
[2]
[3]