Canon imagePRESS C1 Service Manual - page 303
Chapter 5
5-24
5.4.5 Reader Controller PCB
5.4.5.1 Preparation for Removing the Reader Controller
PCB (imagePRESS C1 Series/imagePRESS C7000
Series)
0013-9947
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Remove the copyboard glass. (page 5-16)Reference [Removing the
Copyboard Glass]
5.4.5.2 Removing the Reader Controller PCB
(imagePRESS C1 Series)
0013-9948
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Detach the reader right upper cover [1].
- 2 cover rubbers [2]
- 2 screws [3]
F-5-87
2) Detach the reader right cover [1].
- 3 cover rubbers [2]
- 3 screws [3]
F-5-88
3) Detach the CCD unit cover [1].
- 9 screws [2] (3 on the right side of the reader assembly)
F-5-89
F-5-90
Points to Note When Attaching the CCD Unit Cover
When attaching the CCD unit cover, be sure to hook the 2 claws [1] on the 2
slots and then fix it by screw.
F-5-91
4) Lift the original size sensor unit [1] slightly.
- 3 screws [2]
F-5-92
5) Remove the original size sensor unit [1].
- 1 connector [2]
F-5-93
6) Remove the reader controller PCB [1].
- 4 flat cable [2]
- 1 frat cable [3]
- 1 connector [4]
- 4 screws [5]
[1]
[2]
[3]
[2]
[3]
[1]
[2]
[2]
[2]
[3]
[3]
[3]
[1]
[2]
[2]
[2]
[2]
[2]
[1]
[2]
[1]
[1]
[2]