Canon imagePRESS C1 Service Manual - page 888
Chapter 15
15-25
15.4.2 Jam Code (Finisher-Related)
0012-4838
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
T-15-10
xx04
Cassette 4 pickup sensor
PS47
xx05
Vertical path 4 sensor
PS56
xx06
Vertical path 3 sensor
PS55
xx07
Vertical path 2 sensor
PS54
xx08
Vertical path 1 sensor
PS53
xx09
Vertical path joint sensor
PS27
xx10
Reverse vertical path sensor
PS18
xx0A
Registration sensor
PS5,PS6,PS12
xx0B
Post secondary transfer sensor
PS13
Not detect stationary jam.
xx0C
Fixing inlet sensor
PS14
Detect residual jam only.
xx0D
Inner delivery sensor
PS15
Not detect stationary jam.
xx0E
Reverse inlet sensor
PS17
xx11
Vertical path 0 sensor
PS26
xx12
Duplex left sensor
PS19
xx13
Duplex center sensor
PS20
Power ON jam only
xx14
Duplex right sensor
PS40
xx18
Registration sensor
PS12
Power ON jam only
xx19
Deck pickup sensor
PS101
Common to side paper decks
xx1A
Deck pullout sensor
PS106
Common to side paper decks
xx1B
decurler inlet sensor
PS76
xx1C
Buffer decurler outlet sensor
PS78
E10A
Registration ON delay jam
PS12
E20A
Thick paper detection jam
PS65
0D91
Wrong size specification (plain paper with smaller size than the specified one is
fed)
PS12
In the modes other than OHP mode
0D92
Wrong material specification (plain paper is fed in the OHP sheet setting)
PS5, PS6
0D93
Wrong material specification (OHP sheet is fed in the plain paper setting)
PS5, PS6
Code
Type of Jam
Sensor No.
Details
1011
Inlet path sensor, Feed delay jam
PI103
1101
Inlet path sensor, Feed delay jam
PI103
A sheet fails to come out of the inlet path sensor even if it is fed for a
certain length of time (distance) after the inlet path sensor detects it.
1001
Inlet path sensor, Feed delay jam
PI103
When the Punch unit is not connected, the inlet path sensor fails to
detect a sheet even if a specified length of time passes after the
delivery signal is received. The inlet path sensor fails to detect a sheet
even in the case of interval (distance) feeding.
1002
Punch path sensor (punch registration sensor), Feed delay jam
The punch path sensor fails to detect a sheet even if a specified length
of time passes after the delivery signal is received.
Code
Type of Sensor
Sensor No.
Remarks