Canon imagePRESS C1 Service Manual - page 986
Chapter 16
16-89
CS1OFWIM
Adjust the main unit offset of the solid white ideal brightness value M for Color Sensor
1
Setting range: 0 to 1023
Standard value: 0
CS1OFDMM
Adjust the main unit offset of the solid actual measurement brightness value M for Color Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS1OFDMY
Adjust the main unit offset of the solid actual measurement brightness value Y for Color Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS1OFDIM
Adjust the main unit offset of the solid ideal brightness value M for Color Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS1OFDIY
Adjust the main unit offset of the solid ideal brightness value Y for Color Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS1OFHMM
Adjust the main unit offset of the HT actual measurement brightness value M for Color Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS1OFHMY
Adjust the main unit offset of the HT actual measurement brightness value Y for Color Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS1OFHIM
Adjust the main unit offset of the HT ideal brightness value M for Color Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS1OFHIY
Adjust the main unit offset of the HT ideal brightness value Y for Color Sensor 1.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFDMK
Adjust the main unit offset of the solid actual measurement brightness value K for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFDMC
Adjust the main unit offset of the solid actual measurement brightness value C for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFDIK
Adjust the main unit offset of the solid ideal brightness value K for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFDIC
Adjust the main unit offset of the solid ideal brightness value C for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFHMK
Adjust the main unit offset of the HT actual measurement brightness value K for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFHMC
Adjust the main unit offset of the HT actual measurement brightness value C for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFHIK
Adjust the main unit offset of the HT ideal brightness value K for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
CS2OFHIC
Adjust the main unit offset of the HT ideal brightness value C for Color Sensor 2.
1
Setting range: 0 to 1023
Standard value: 0
COPIER>ADJUST>P-PASCAL
Subheading Contents
Level