Canon imagePRESS C1 Service Manual - page 451
Chapter 7
7-102
F-7-213
7.14.26 Secondary Transfer Outside Roller Sub Unit
7.14.26.1 Preparation for Removing the Secondary
Transfer Outside Roller Sub-Unit
0013-9765
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front cover.
2) Slide the fixing/feeding unit toward the front.
3) Remove the secondary transfer outside roller unit. (page 7-101)Refer-
ence [Removing the Secondary Transfer Outer Roller Unit]
7.14.26.2 Removing the Secondary Transfer Outside
Roller Sub-Unit
0013-9766
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the feeding guide [1].
- 3 screws [2]
F-7-214
2) Remove the secondary transfer front guide [1].
- 3 screws [2]
F-7-215
3) Remove the secondary transfer outside roller subunit [1].
- 2 screws [2]
F-7-216
7.14.27 Intermediate Transfer Belt
7.14.27.1 Preparation for Removing the ITB
0013-9713
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Detach the process unit cover.
3) Lift the hopper unit.
4) Remove the primary charging assembly. (page 7-86)Reference [Re-
moving the Primary Corona Assembly]
5) Remove the pre-transfer charging assembly. (page 7-88)Reference [Re-
moving the pre-transfer corona assembly]
6) Remove the drum unit. (page 7-89)Reference [Removing the Drum
Unit]
7) Pull out the fixing/feeding unit.
8) Remove the intermediate transfer unit. (page 7-100)Reference [Remov-
ing the Intermediate Transfer Unit]
9) Remove the ITB cleaning unit. (page 7-99)Reference [Removing the
ITB Cleaning Unit]
7.14.27.2 Removing the ITB
0013-9714
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Place the ITB sub unit on the motor base.
1-1) Insert the 2 shafts [3] of the ITB sub unit [1] to the holes [4] on the motor
base [2].
F-7-217
2) Remove the 2 potential guide plates [1].
- 2 screws [2]
F-7-218
3) Detach the ITB rail plate [1].
- 1 harness [2]
- 2 screws [3]
[4]
[1]
[2]
[2]
[2]
[3]
[5]
[1]
[2]
[2]
[1]
[2]
[1]
[2]
[2]
[1]
[2]
[3]
[3]
[4]
[1]
[2]
[1]
[2]