Canon imagePRESS C1 Service Manual - page 127
Chapter 2
2-33
F-2-43
10) Attach the reuse band [3] to the hole [2] of the cable supporting plate [1].
F-2-44
11) Attach the harness supporting plate [1].
- 1 screw (binding; M4X8) [2]
F-2-45
12) Attach the grounding wire [1] to the harness support plate.
- 1 screw (binding; M4X9) [2]
F-2-46
13) Attach the panel mounting cover [1].
- 1 screw (binding; M4X8) [2]
F-2-47
2.2.7 Mounting the Delivery Tray
0012-9033
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Fit the 3 claws [2] of the delivery tray [1] into the holes [3] of decurler.
F-2-48
2.2.8 Attaching the Outer Delivery Roller Cover
0015-6342
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the decurler front cover [1].
F-2-49
[1]
[1]
[2]
[3]
[1]
[2]
[1]
[2]
[2]
[1]
[1]
[2]
[3]
[1]