3Com S7902E Command Reference Manual - page 1035
1-20
Refer to
Table 1-5
for description on the fields above.
display bgp ipv6 routing-table peer
Syntax
display bgp ipv6 routing-table peer
{
ipv4-address
|
ipv6-address
} {
advertised-routes
|
received-routes
} [
network-address prefix-length
|
statistic
]
View
Any view
Default Level
1: Monitor level
Parameters
ipv4-address:
Specifies the IPv4 peer to be displayed.
ipv6-address
: Specifies the IPv6 peer to be displayed.
advertised-routes
: Routing information advertised to the specified peer.
received-routes
: Routing information received from the specified peer.
network-address prefix-length
: IPv6 address and prefix length. The prefix length rangs from 0 to 128.
statistic
: Displays route statistics.
Description
Use the
display bgp ipv6 routing-table peer
command to display the routing information advertised to
or received from the specified IPv4 or IPv6 BGP peer.
Examples
# Display the routing information advertised to the specified BGP peer.
Total Number of Routes: 2
BGP Local router ID is 20.20.20.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 20:20:: PrefixLen : 64
NextHop : 20:20::20:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
*> Network : 40:40:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0