3Com S7902E Command Reference Manual - page 1624
1-12
Field
Description
BGP current state
Current status of the BGP session
Up for
Duration since the peer is established
BGP current event
Current event of the BGP session
BGP last state
State that the BGP session was in before
transitioning to the current status
Port
Local and remote ports of the BGP session
Configured
Settings of the local timers, including the active
hold interval and keepalive interval
Received
Received active hold interval
Negotiated
Negotiated active hold interval
Peer optional capabilities
Optional capabilities of the peer
Peer support bgp multi-protocol extended
The peer supports multiprotocol extension.
Peer support bgp route refresh capability
The peer supports route refresh capability.
Address family IPv4 Unicast
IPv4 unicast family capability
Received
Counts of received messages and received
update messages
Sent
Counts of sent messages and sent update
messages
Maximum allowed prefix number
Maximum number of routes that the VPN
instance supports
Threshold Threshold
value
Optional capabilities
Local optional capabilities
Route refresh capability has been enabled
Whether the route refresh capability is supported
Nesting-vpn peer (vpn-instance vrf1)
Whether the VPNv4 peer is a nested VPN peer
Peer Preferred Value
Weight for the routes from the peer
# Display all BGP VPNv4 peer information.
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
1.1.1.1 4 100 51 64 0 2 00:45:16 Established
Table 1-7 display bgp vpnv4 all peer
command output description
Field
Description
Peer
IP address of the peer
V
Version of BGP that the peer runs