3Com S7902E Command Reference Manual - page 1765
1-24
local-user password-display-mode
Syntax
local-user password-display-mode
{
auto
|
cipher-force
}
undo local-user password-display-mode
View
System view
Default Level
2: System level
Parameters
auto
: Displays the password of a user based on the configuration of the user by using the
password
command.
cipher-force
: Displays the passwords of all users in cipher text.
Description
Use the
local-user password-display-mode
command to set the password display mode for all local
users.
Use the
undo local-user password-display-mode
command to restore the default.
The default mode is
auto
.
With the
cipher-force
mode configured:
z
A local user password is always displayed in cipher text, regardless of the configuration of the
password
command.
z
If you use the
save
command to save the configuration, all existing local user passwords will still be
displayed in cipher text after the device restarts, even if you restore the display mode to
auto
.
Related commands:
display local-user
,
password
.
Examples
# Specify to display the passwords of all users in cipher text.
[Sysname] local-user password-display-mode cipher-force
password
Syntax
password
{
cipher
|
simple
}
password
undo password
View
Local user view
Default Level
2: System level