3Com S7902E Command Reference Manual - page 1387
1-16
View
Any view
Default Level
1: Monitor level
Parameters
mode
: Displays the information of join/prune messages to send in the specified IPv6 PIM mode. IPv6
PIM modes include
sm
and
ssm
, which represent IPv6 PIM-SM and IPv6 PIM-SSM respectively.
flags flag-value
: Specifies to display IPv6 PIM routing entries containing the specified flag(s).Values
and meanings of
flag-value
are as follows:
z
rpt
: Specifies routing entries on the RPT.
z
spt
: Specifies routing entries on the SPT.
z
wc
: Specifies wildcard routing entries.
interface-type
interface-number
: Displays the information of join/prune messages to send on the
specified interface.
ipv6-neighbor-address
: Displays the information of join/prune messages to send to the specified IPv6
PIM neighbor.
verbose
: Displays the detailed information of join/prune messages to send.
Description
Use the
display pim join-prune
command to view the information about the join/prune messages to
send.
Examples
# View the information of join/prune messages to send in the IPv6 PIM-SM mode.
Expiry Time: 50 sec
Upstream nbr: FE80::2E0:FCFF:FE03:1004 (Vlan-interface1)
1 (*, G) join(s), 0 (S, G) join(s), 1 (S, G, rpt) prune(s)
-------------------------------------------------------------------------
Total (*, G) join(s): 1, (S, G) join(s): 0, (S, G, rpt) prune(s): 1
Table 1-6 display pim join-prune
command output description
Field
Description
Expiry Time:
Expiry time of sending join/prune messages
Upstream nbr:
IPv6 address of the upstream IPv6 PIM neighbor
and the interface connecting to it
(*, G) join(s)
Number of (*, G) joins to send
(S, G) join(s)
Number of (S, G) joins to send
(S, G, rpt) prune(s)
Number of (S, G, rpt) prunes