3Com S7902E Command Reference Manual - page 764
1-32
[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling
[Sysname-ospf-1] enable out-of-band-resynchronization
filter
Syntax
filter
{
acl-number
|
ip-prefix ip-prefix-name
} {
import
|
export
}
undo filter
{
import
|
export
}
View
OSPF area view
Default Level
2: System level
Parameters
acl-number
: ACL number, in the range 2000 to 3999.
ip-prefix-name
: IP prefix list name, a string of up to 19 characters. For details about IP prefix lists, see
Route Policy Configuration
in the
IP Routing Volume
.
import
: Filters Type-3 LSAs advertised into the area.
export
: Filters Type-3 LSAs advertised to other areas.
Description
Use the
filter
command to configure incoming/outgoing Type-3 LSAs filtering on an ABR.
Use the
undo filter
command to disable Type-3 LSA filtering.
By default, Type-3 LSAs filtering is disabled.
This command is only available on an ABR.
Examples
# Apply IP prefix list
my-prefix-list
to filter inbound Type-3 LSAs, and apply ACL 2000 to filter outbound
Type-3 LSAs in OSPF Area 1.
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] filter ip-prefix my-prefix-list import
[Sysname-ospf-100-area-0.0.0.1] filter 2000 export