3Com S7902E Command Reference Manual - page 2104
3-5
View
User view
Default Level
3: Manage level
Parameters
tftp-ipv6-server
: IPv6 address or host name (a string of 1 to 46 characters) of a TFTP server.
-i
interface-type interface-number
: Specifies the egress interface by its type and number. This
parameter can be used only in case that the TFTP server address is a link local address and the
specified egress interface must have a link local address (For the configuration of link local address,
see
IPv6 Basics
in the
IP Services Volume
).
get
: Downloads a file.
put
: Uploads a file.
source-filename
: Source filename.
destination-filename
: Destination filename. If not specified, this filename is the same as the source
filename.
Description
Use the
tftp ipv6
command to download a specified file from a TFTP server or upload a specified local
file to a TFTP server.
This command applies to IPv6 networks.
Examples
# Download
filetoget.txt
from the TFTP server.
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait....
TFTP: 411100 bytes received in 2 second(s)
File downloaded successfully.