3Com S7902E Command Reference Manual - page 2039
1-25
z
If you only provide the
time1
argument, when
time1
is earlier than the current system time, the
specified command is executed at
time1
of the next day; when
time1
is later than the current
system time, the specified command is executed at
time1
of the current day.
z
No matter whether you use the
at
or
delay
keyword, the difference between the execution time of a
command and the current system time cannot exceed 720 hours (namely, 30 days).
z
At present, you can specify only user view and system view. To automatically execute the specified
commands in other views or automatically execute multiple commands at a time, you can configure
the system to automatically execute a batch file at a specified time (note that you must provide a
complete file path for the system to execute the batch file.).
z
The system does not check the
view
and
command
arguments. Therefore, ensure the correctness
of the
command
argument (including the correct format of
command
and the correct relationship
between the
command
and
view
arguments.).
z
After the specified automatic execution time is reached, the system executes the specified
commands without displaying any information except system information such as log, trap and
debug.
z
When the system is executing the specified command, you do not need to input any information. If
there is information for you to confirm, the system automatically inputs
Y
or
Yes
; if certain
characters need to be input, the system automatically inputs a default character string, and inputs
an empty character string when there is no default character string.
z
For the commands used to switch user interfaces, such as
telnet
,
ftp
, and
ssh2
, the commands
used to switch views, such as
system-view
,
quit
and
interface ethernet
, and the commands used
to modify status of the user that is executing commands, such as
super
, the operation interface,
command view and status of the current user are not changed after the automatic execution
function is performed.
z
If you modify the system time after the automatic execution function is configured, the scheduled
automatic execution configuration turns invalid automatically.
z
Only the latest configuration takes effect if you execute the
schedule job
command repeatedly.
z
This feature does not support the active main board (AMB) and standby main board (SMB)
switchover function. That is, after this feature is configured on the AMB, the configuration is not
backed up to the SMB.
Examples
# Configure that the device will execute the batch file
1.bat
in system view in 60 minutes (supposing that
the current time is 11:43).
Info: Command execute 1.bat in system view will be executed at 12:43 10/31/2007 (in 1 hours
and 0 minutes).
# Configure that the device will execute the batch file
1.bat
in system view at 12:00 in the current day
(supposing that the current time is 11:43).
Info: Command execute 1.bat in system view will be executed at 12:00 10/31/2007 (in 0 hours
and 16 minutes).
schedule reboot at
Syntax
schedule reboot at
hh:mm
[
date
]