3Com S7902E Command Reference Manual - page 1541
1-9
Peer LDP ID : 172.17.1.2:0
Peer Max PDU Length : 4096 Peer Transport Address : 172.17.1.2
Peer Loop Detection : Off Peer Path Vector Limit : 0
Peer FT Flag : Off Peer Keepalive Timer : 45 Sec
Recovery Timer : ---- Reconnect Timer : ----
Peer Label Advertisement Mode : Downstream Unsolicited
Peer Discovery Source : Vlan-interface1
------------------------------------------------------------
Peer LDP ID : 168.1.1.1:0
Peer Max PDU Length : 4096 Peer Transport Address : 168.1.1.1
Peer Loop Detection : Off Peer Path Vector Limit : 0
Peer FT Flag : Off Peer Keepalive Timer : 45 Sec
Recovery Timer : ---- Reconnect Timer : ----
Peer Label Advertisement Mode : Downstream Unsolicited
Peer Discovery Source : Vlan-interface2
-------------------------------------------------------------
Peer LDP ID : 100.10.1.1:0
Peer Max PDU Length : 4096 Peer Transport Address : 100.10.1.1
Peer Loop Detection : Off Peer Path Vector Limit : 0
Peer FT Flag : Off Peer Keepalive Timer : 45 Sec
Recovery Timer : ---- Reconnect Timer : ----
Peer Label Advertisement Mode : Downstream Unsolicited
Peer Discovery Source : Vlan-interface3
------------------------------------------------------------
display mpls ldp remote-peer
Syntax
display mpls ldp remote-peer
[
remote-name
remote-peer-name
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default Level
1: Monitor level
Parameters
remote-peer-name
: Name of the remote peer, a case-insensitive string of 1 to 32 characters.
|
: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration
in the
System
Volume
.
begin
: Displays all lines starting with the line that matches the regular expression.
exclude
: Displays all lines other than those matching the regular expression..
include
: Displays all lines matching the regular expression.